Open the Noorio Charging Port in 7 Ways: Effective and Safe

Open the Noorio Charging Port in 7 Ways: Effective and Safe
The Noorio indoor security camera is a reliable and high-quality product that is designed to keep your home safe and secure.

However, the charging port of this product is made to IP66 standard, which means that the plastic on the charging port is very difficult to open.

In this article, we will discuss several safe and effective methods for opening the charging port of your Noorio home security camera.

Open the Noorio Charging Port in 7 Ways: Effective and Safe

Using Your Fingernails

The easiest and safest method for opening the charging port of your Noorio B200 home security camera is to use your own fingernails.

The plastic cover on the charging port is tough, but with patience you can pry it open using your fingernails. Place the tip of your index fingernail under the edge of the plastic cover and gently lift up while applying firm and steady pressure. Slowly work your way around the edges, lifting a little at a time until you have created an opening. Continue leveraging your fingernail to gradually make the opening larger. Be very careful not to crack the plastic.

This method is safe and effective, and it does not require any tools, but you may have to try a few more times.

Utilizing Soft Plastic Tools

If you do not want to use your fingernails, you can utilize soft plastic tools like gift card, plastic razor blade, guitar picks or credit cards to open the charging port of your Noorio wireless home security camera. These tools can provide more leverage than fingernails.

You can simply insert the tool into the gap between the plastic cover and the camera body, and gently pry it open. Just be sure to choose a tool that is safe for use on plastic surfaces and won't damage the charging port or other components of your camera.

Employing Adhesive Tape

You can also employ adhesive tape to open the charging port of your B200 indoor security camera.

Simply stick a piece of adhesive tape to the plastic cover, and then pull the tape to open the cover.

This method is safe and effective, and it does not require any sharp tools.noorio home security camera wireless

Leveraging a Suction Cup

If the other methods do not work, you can leverage a suction cup to open the charging port of your Noorio security camera for home.

Place the suction cup over the plastic cover, and then gently pull the suction cup to open the cover. Buta you have to use a soft plastic suction cup to prevent any damage to the charging port.

Wiping with a Damp Cloth

If the plastic cover of your Noorio B200 wireless security camera is dirty or dusty, you can wipe it with a damp cloth to make it easier to open.

Wet a cloth with water, and then gently wipe the plastic cover of the charging port.

This method is safe and effective, and it does not require any sharp tools.

Gently Tapping the Area

Another safe and effective method for opening the charging port of your Noorio  home security camera is to gently tap the area around the charging port with your fingers.

This can help to loosen the plastic cover, and make it easier to open.

Be sure to tap gently to prevent any damage to the charging port.

Applying Gentle Heat

Finally, you can apply gentle heat to the plastic cover of the charging port to make it easier to open. Some of our customers use the Noorio home security camera as an outdoor monitor or a bird monitor, which sometimes causes the rubber to age or freeze due to outdoor conditions.

Simply use a hair dryer or a heat gun to warm up the plastic cover, and then grip it with your fingers and pull it open.

Remember, be sure to use gentle heat to prevent any damage to the charging port.noorio wireless outdoor security camera

Other details about the charging port cover

Here are some additional details about the Noorio camera charging port cover:

  • The charging port cover is made of high-grade plastic that is durable and water-resistant to meet the IP66 ingress protection rating. It helps protect the USB charging contacts from damage, corrosion and water intrusion.
  • The plastic cover forms a tight seal over the charging port to maintain its water-resistant integrity. This is why it can be difficult to remove without potentially compromising the seal.
  • There are posts or ribs on the inside of the cover that extend into the charging port housing to help lock the cover in place. These posts need to be disengaged or gently snapped to open and remove the cover.
  • It is important to be patient, take your time and apply pressure slowly and steadily to avoid cracking or breaking the cover. With persistence, it is possible to open the cover intact for access to the USB charging port.
  • As an alternative, some users have had success gently prying open or snapping off just a portion of the cover to expose part of the charging port, which may be sufficient for charging purposes. But removing too much of the cover could compromise the water resistance.So if you use Noorio security camera for outdoor, don't do it.

Does this help provide more context and details about the Noorio B200 charging port cover? Let me know if you have any other questions.

Conclusion

In conclusion, there are several safe and effective methods for opening the charging port of your Noorio B200 home security camera.

By using these methods, you can keep your home safe and secure, and ensure that your camera is always fully charged and ready to use.

Read More

ブログに戻る

1件のコメント

I’ve found that the safest way to initially open the charging port on a new device, is to use the bowl end of a spoon. In this way you will not damage the gasket material. The spoon’s bowl edge is a perfect lever. Once the unit’s charge port has been opened for the first time, opening with a fingernail (or thumbnail) afterward is usually quite easy.

John G

コメントを残す

コメントは公開前に承認される必要があることにご注意ください。